HOME PRODUCTS HOW TO BUY SYSTEM SERVICES ABOUT US SITEMAP 繁 體中文        
HOME > PRODUCTS >NBAD Switch >AX6000S
   
AX6000S

AX6000S Security Switch is a 24/48 port Ethernet & Fast-Ethernet Layer 2+/4 switch featured with10/100Mbps, IEEE802.3 auto MDI-X & half/full duplex auto detection. Build in chipset makes AX6000S to be a Plug and Play device. Functions, such as packet switch TCP/UDP on line statistic and anomaly detection, are provided by hardware. It also supports hierarchical intelligent security control, generic functions of Layer 2+, Network Management Intelligence multiple port trucking 802.1x, and functions of Layer 4.

AX6000S Security Switch owns generic functions of Layer 2+. It covers Intelligence Network Management multiple port trucking group (by 2, 4, or 8 ports) 802.1x authentication spanning tree and port mirroring /monitor. Layer 4 session accounting capability makes AX6000S switch could be Edge Switch and L4 flow sensor. Combining with flow analyzer and central monitor software provided by AX6000S manager could offer an excellent solution for Network Behavior Anomaly Detection.

Features

  1. MAC/IP Binding Security
  2. Rogue DHCP Prevention
  3. DoS/ DDoS Filtering
  4. Hardware Netflow v1/v5/v9
  5. Session Anomaly Detection
  6. Rate Limit
  7. Quarantine Malicious MAC
  8. Pop Up Virus Remedy Redirection
  9. Pop Up Virus Alert

 

Software Specifications

  1. Chassis
  2. 24/48 port Ethernet/Fast Ethernet 1U chassis with 2 Combo gigabit u plink
  1. Advanced L2-L4 Service
  2. Distributed L2 + switching and L4 services processing

 

  1. High Performance
  2. Provide up to 13.6Gbps non-blocking switching fabric which supports wire-speed
  3. L2 packet switching and wire-speed
  4. L3 network access security
  5. L4 application flow statistics/anomaly detection
  1. L2 Network Access Security
  2. Support port security
  3. Support IEEE 802.1 Q standard VLAN
  4. Support up to concurrent 255 VLANs tag value
  5. Support up to 4, 094 802.1 Q standard VLANs-TBD
  6. Support IEEE 802.1x authentication

 

  1. L3 Network Access Security
  2. Support Port +IP/MAC+IP IP locking, to avoid IP address conflict by other user
  3. Support DoS/DDoS, avoid to be attacked by outsider
  4. Support DoS/DDoS filter, avoid user to attack outside network. Enhance Image
  1. L4 Network Security Monitor
  2. Use ASIC mechanism to support netflow v1/v5/v9 format output(Enhance Image)
  3. Can display 200 lines log about L4 netflow information, which include time, source/destination IP address, TCP/UDP port#, protocol byte count.
  4. Network Flow Anomaly Detection can define and detect anomaly ous netflow

 

  1. L2-4 Network Operation Control
  2. Quarantine-support MAC based network quarantine
  3. Rate Limit-support up and down stream speed limitation
  4. Redirection-can redirect network flow path from on port to another port

 

  1. Advanced QoS-TBD
  2. L2, L3, L4 Classification of Service (CoS)
  1. Network Management
  2. In-band SNMP, SNMP Trap, RMONI/II 4 Group (Statistic, History, Alarms, Events) , RS232 console and Telnet CLI out-of-band, Web management, policy management, port mirroring, port mapping, TFTP upgrade

 

  1. Network Intelligence
  2. 802.3ad link aggregation with port failure recovery at 4 port trunk and 4Gbps max
  3. Supports DNS lookup and NTP network time synchronization
  4. Event logging and remote SYSLOG support

Application Diagram

Application Diagram


 

Hardware Specifications

  1. Hardware Features24/48 10/100 Mbps Ethernet auto-sensing and auto-negotiation, full duplex plus 2G uplink architecture
  2. Chassis
    1. Fixed 24 or 48 port units with 2 Gigabit uplink
    2. Build-in 2 Combo ports with 1000BaseX(Fiber) and 10/100/1000BaseT(Copper)

???? selectable

  1. 10/100M Port count/ Switch
  2. SS2400:24 ports 10/100Mbps Ethernet RJ-45 UTP
  3. SS2400:24 ports 10/100Mbps Ethernet RJ-45 UTP
  4. SS4800 : 48 ports 10/100Mbps Ethernet RJ-45 UTP
  5. SS4800:48 ports 10/100Mbps Ethernet RJ-45 UTP
  6. Switch Capacity13.6Gbps Max
  7. Flash/DRAM Memory16/32 MB
  8. Table SizeUp to 8K MAC address
  9. Connector Types/DimensionRJ-45, 1.5U with 19 Rack mount kit
  10. Cable TypeUnshielded twisted pair(100 ohms), Shielded twisted pair(100ohms)
  11. Unit LED IndicatorPhysical Status, Operation Status, Primary Power, Secondary Power, Temperature,Console, Demo Display, Setting (Speed/Duplex). Diagnostics
  12. Port LED IndicatorLink integrity and activity, TX/RX, Full/Half Duplex
  13. Safety & EMI/EMC StandardsFCC Class A, CE Mark
  14. Power Supply85-270 VAC auto-sensing,47~63Hz
  15. Operating Temp0~45 degree C
  16. Operating Humanity5%~95%
datasheet pdf
Switch pic
   
空白  2F, No.9, R&D Rd. I, Science Park, Hsinchu, Taiwan 300 Tel: + 886-3-666-2050 Fax: + 886-3-666-2051
   sales:sales@axtronics.com.tw      support:support@axtronics.com.tw
Copyright (c) 2004 Axtronics Inc. All Rights Reserved.    Best view in 1024X768 Privacy Policy