The Wireless Outdoor Encryption
Bridge links two or more separate networks (typically located in
different buildings) to create a single expanded LAN quickly, simply,
and economically. It delivers higher transmission rates than an E1 or
T1 line, and eliminatesthe inconvenience of installing an expensive
leased line or fiber-optic cable. The Wireless Outdoor Encryption
Bridge fully complies with the IEEE 802.11b/g standard. Combining
superior wireless technology and advanced features, the Wireless
Outdoor Bridge is a reliable, high-performance, cost-effective solution
for the most demanding wireless networking environments.
Benefit
Built in All
Weather-Proof Housing
20KA
Lightning Protection
Operate in
the 2.4GHz (802.11g) band Connecting Devices Up To 500 Meters (200mW)
2 Mini PCI
Slot –purpose Application
Hardware
Base
Platform
INTEL
IXP 425
Clock Speed
266/400/533 MHz
Serial Port
RS-232 serial port
Reset Switch
Push-button
momentary contact switch
Standards
Conformance
IEEE 802.3 / IEEE
802.3u
Ethernet
Configuration
10/100BASE-TX
auto-negotiation WAN port x 1 (RJ-45 connector) Auto MDI/MDI-X enabled
SDRAM
64Mbytes
Flash
8/16Mbytes
LED
Indicators
Power, WAN, WLAN,
Antenna Alignment Monitoring
JTAG reserved
On board connector
to connect to off the shelf JTAG CPU emulator
PCB
Dimensions
200 mm X 180 mm
TRF Module Intersil
Interface
Mini-PCI bus
Network Standards
Conformance
IEEE802.11 b /g
compliant ,draft IEEE 802.11e,f,h,&I standards, IEEE
802.11x
Data Transfer Rate
IEEE802.11b：1 / 2 /
5.5 / 11Mbps (auto sensing)
IEEE802.11g：6 / 9 / 12 / 18 / 24 / 36 / 48 / 54Mbps (auto sensing)
Up to 54Mbps and 108Mbps(Super G Mode) high-speed data rates
